aligning the six pivots

After spending a healthy couple hours rebuilding two of these movements of learned a couple things: 
First, if you rearrange the letters and numbers in A2813 it spells “Satan’s illegitimate demon spawn”. 
Second, after struggling through aligning the six pivots over and over - I finally realized the dang click is constantly in the way. I ended up using a very small piece of rodico to hold it open while I set the bridge. Voila! I set it first shot after that. With the click not pushing on the  paw winding wheel it stood straight and made life easier. Just be careful not to place the rodico in a way that get it pinched and gummed in there once assembled.

 Another trick is just to turn it 180° and put it back after the plate has been mounted. It works perfectly